Click image to view full size image
The XS3000B chip spreader is mainly used to spreading chips after the asphalt spraying work for prime coat, tack coat and water-proof coat in road construction of high level. It also can be used for the construction work of country road with smaller traffic flow. Pls. see figure 1 for the outline of the chip spreader.
Our XS3000B Chip Spreader is designed in hanging structure. It is hanged at the back end of the dumper truck to work with the tilter to be lift up at 35°～45°. The spreading rate can be adjusted through the changing of gate openness and motor speed. These two methods should be done at the same time. The spreading width and position can be managed by opening and closing of the specified nozzles.
Main performance
1. The allowed aggregate size is ranging widely, which can meet the spreading requirements of aggregate for majority.
2. The spreading rate is even irrespective of the truck speed.
3. The spiral speed is in step with the material roller, which is good for the material transfer
Main parameters
No |
Parameters |
Unit |
Standard Value |
Remarks |
1 |
Spreading width |
mm |
3000 |
Can be adjusted with the difference at 250 |
2 |
Spreading speed |
km/h |
3～4.8 |
|
3 |
Max. Spreading rate |
L/m2 |
22 |
|
4 |
Min. Spreading rate |
L/m2 |
3 |
|
5 |
Aggregate size |
mm |
3～25 |
|
6 |
Overall dimension |
mm |
2700×2100×1850 |
|
7 |
Gross weight |
kg |
1100 |